A PAR spotlight (parabolic aluminized reflector) is a directional LED floodlight that gathers light into a narrow, clearly defined beam. On an exhibition stand it takes on the role of accent lighting: it highlights an individual product, logo or presentation wall where flat light fades. Thanks to powerful LED technology it combines high luminous efficiency with low consumption and a long service life, so it lights the exhibition space intensely while staying cool to the touch.
A parabolic reflector and COB or multi-diode LED units create a powerful, densely focused light beam with high luminous flux in lumens. The beam stays sharp even at a greater distance, so from a single pole or bracket you can reach exhibits deep within the stand. Different optic versions, from a narrow spot angle for a pinpoint accent to a wider angle for wall washing, allow you to tailor the light pattern precisely to the layout.
The spotlights are available in versions with steady white light in a choice of colour temperatures (3000K warm, 4000K neutral, 5700K cool) and in RGB and multicolour versions for vivid, dynamic scenic lighting. Tri-Color and RGB units make it possible to create, with the same floodlight, anything from a calm presentation atmosphere to striking colour accents at an opening or event. Match the colour temperature and hue to the brand's graphic identity so the light does not distort the colours of the exhibits.
The U-shaped swivel bracket allows the spotlight to be tilted and turned so you can aim the beam exactly at the target. Mount the floodlights on trusses, exhibition-system poles, floor stands or a light track via a dedicated adapter. Plug & play connection through powerCON connectors means you can daisy-chain several units and power them from a single point, while assembly is done without tools in a few minutes.
The system is complemented by accessories for power supply and safe suspension: a powerCON power cable with a Schuko plug connects the first spotlight to the mains, while a powerCON link cable carries power onwards from unit to unit. A safety cable with a safety clip secures the suspended floodlight as additional protection against falling. Also available are mounting adapters, truss clamps and barndoors for limiting light spill.
The spotlights are designed for frequent stand set-up and dismantling. The durable aluminium housing withstands transport and repeated use, while sets with several units are supplied in a dedicated transport case (flightcase) that safely protects the floodlights during moves and speeds up preparation on site. Efficient LED luminaires with low consumption and a long service life reduce operating costs and reduce heating of the exhibition space.
| ODIN 200 CCT |  ODIN 200 RGBL |  ODIN 300 CCT | |
|---|---|---|---|
| Power | 200 W | ||
| Light source | LED (COB) | ||
| Luminous flux | 32,000 lm | 36000 lm | |
| Colour temperature | 2700 K - 6000 K (adjustable) | adjustable (CCT) 2700-6000 K | |
| CRI | >96 | >85 | >96 |
| Beam angle | 20° - 65° (Fresnel lens) | 25° - 65° (manually) | 20°-60° (adjustable; spec table: 20°-65°, manual) |
| Dimming | Yes, stepless | yes (stepless) | |
| Control | DMX-512 | DMX-512 | |
| DMX channels | AR1.D(4CH), AR2.D(5CH), AR2.S(6CH), ARC.1(3CH), ARC.2(4CH), HSV(3CH), STAG(11CH) | 1, 2, 3, 5 | 1, 2, 3, 5 |
| Signal connector | 3-pin XLR in/out | ||
| Power supply | PowerCon in/out | ||
| Input voltage | AC 100-240 V | AC 100-240 V | |
| Series connection | Up to 6 luminaires | ||
| Pan and tilt | Yes (tilt up to 180°) | yes | |
| Lens / reflector | Fresnel | Fresnel | |
| Material / color | Aluminium / black | aluminium / black | |
| Dimensions (overall) | 390 x 229 x 236 mm | ||
| Base dimensions | 300 x 200 x 195 mm | ||
| Weight | 4500 g | 4.5 kg (including Barndoor) | 5.4 kg (with barndoor) |
| Gross weight | 6000 g | ||
| Packaging dimensions | 350 x 350 x 400 mm | ||
| Lifespan | 50,000 hours | 50000 h | |
| Protection (IP) | IP20 | ||
| Included accessories | Barndoor, filter frame, power cable | Barndoor, Filter frame, Power cable | |
| Certificates | CE, RoHS | CE, RoHS | |
| Product code (SKU) | LPO-200-B346-P | LPO-300-B346-P | |
| Input Voltage | AC 100-240V | ||
| Energy consumption | 200W | ||
| Lamp lifetime | 50000 hrs | ||
| Dimension base | 300 x 200 x 195 mm | ||
| Material | Aluminum | ||
| Color | Black | ||
| LED type | COB | COB (four modules) | |
| Connection | PowerCON In - Out | ||
| Control mode | DMX | ||
| Signal connection | 3-pin XLR in & out | 3-pin XLR (in and out) | |
| IP code | IP20 | ||
| Output power | 300 W | ||
| Power connection | PowerCon in - out | ||
| Connectivity (daisy chain) | up to 4 units | ||
| Dimensions (base) | 328 x 251 x 314 mm | ||
| Protection rating | IP20 | ||
| Included equipment | barndoor, filter frame, power cable |
Specifications, lead time, regional availability.
contact
Tell us what you need. We will prepare a technical proposal aligned with your space, deadline and system.
inquiry
Send us the basic information about your project. For a faster reply, include the fair location, the size of the exhibition space, the timeline and the desired system.
response time:We respond to inquiries within one business day, with a concept design and a ballpark quote.