systems and accessories
Aluminium profiles, connectors and accessories that tie the whole Octanorm system together: tension fabric extrusions, shop fitting, magnetic fixing, additional extrusions, accessories and tools. The base layer of every modular exhibition and retail build.
products in this category
Aluminium extrusions with a silicone-edge (keder) groove for tensioned fabric graphics. Seamless, illuminated or freestanding walls with fast graphic changes.
detailsMaterial: extruded aluminium
Graphics attachment: silicone edge (keder)
Standard profile length: 6000 mm (individual 5000 mm / 5060 mm)
System groove: 4.3 mm; depth 7 mm
Cross-section range: width 16–120 mm, height 9–47 mm
Silicone keder M 1313.50: 14 × 3 mm, 100 m roll
Hanging keder profiles M 1354.01 / M 1356.01: for round keder ø 4–6 mm
Base profiles (examples): M 1302.01 40 × 28 mm; M 1304.01 80 × 40 mm; M 1970.01 40 × 29 mm with system slot; M 1930.01 40 × 11 mm without system slot
Corner connections: 90° (M 1926.37, Z 966.00, Z 990.00)
Application: straight walls, corners, illuminated frames, hanging elements
Complementary aluminium extrusions to extend and adapt Octanorm builds: adapters, transitions and special profiles for specific layouts.
detailsProtective profile A 200.01: L 5000 × W 15 × H 6 mm
Glass panel holder E 421.33: for 6 mm glass, L 5000 × W 11 × H 8 mm
Glass panel holder E 440.30: for E 441, L 5000 × W 16 × H 10 mm
Rubber sealing strip E 441.35: for E 440, L 50 m, W 16 × H 10 mm
Support edge E 442.30: L 5000 × W 16 × H 8 mm
Anti-rattle profile E 444.33: for 4 mm glass, L 50000 × W 13 × H 6 mm
Connecting profile E 451.35: for wooden panels >13 mm, L 5000 × W 7 × H 6 mm
Insert profile W 416.01: 1 system slot for wooden panels, L 5000 × W 16 × H 10 mm
Sliding door, top profile E 400.30: for 4 mm panels, L 5000 × W 16 × H 12 mm
Sliding door, bottom profile E 401.30: for 4 mm panels, L 5000 × W 16 × H 6 mm
Sliding door handle profile E 410.35: for 4 mm panels, L 5000 × W 24 × H 7 mm
Door stop profile E 430.30: for swing doors, glass and wood, L 5000 × W 16 × H 10 mm
Accessories for Octanorm systems: cable channels, adjustable feet, brackets, holders and connectors to adapt booth functionality.
detailsProfile material: Aluminium
Connection system: Round slot (Rundnut), connecting elements at any point and at any angle
Infill panel thickness: 1 mm to 4 mm
Components: Profiles, posts, connecting elements, shelves, brackets, doors and accessories
Expandability: Modular, expandable at any time
On the market since: 1965
Specialised tools for fast, correct assembly of Octanorm profile systems on-site and in the workshop.
detailsPneumatic press PS-0.90: 13 mm system opening, L 420 × W 510 × H 780 mm
Interchangeable tool WPS 1.90: for 13 mm system opening, L 190 × W 78 × H 87 mm
Interchangeable tool WPS 5.90: for 8 mm system opening, L 190 × W 77 × H 86 mm
Foot switch ZPS 100.90: for PS-0, L 180 × W 80 × H 86 mm
Punch pin ZPS 103.90: diameter 13 mm, for WPS 1, L 58 × W 16 × H 16 mm
Drilling guide BS 31.90: drilling 8/10/12 mm, W 105 × H 85 mm
Drilling guide BS 6.90: drilling 10/13 mm, L 110 × W 40 × H 40 mm
Drill bit ZBS 112.90: diameter 8 mm, for drilling guides, L 91 × W 8 × H 8 mm
Step drill bit ZBS 115.90: diameter 12/6.5 mm / 90°, L 112 × W 44 × H 20 mm
Thread tap ZBS 130.90: M10, length 140 mm
Screwdriver E 113.90: hex-star T30, for E 111, L 232 × W 35 × H 35 mm
Ratchet E 115.90: 1/4"
Modular system for retail and showroom fit-out. Shelves, vitrines and display walls from standard Octanorm profiles, reconfigurable without tools.
detailsprofile: 35 × 35 mm aluminium, anodised
modules: shelves, vitrines, hangers, display walls
fixing pitch: 50 mm (standard Octanorm pitch)
shelf load: up to 200 kg/m²
assembly: tool-free, click-in profiles
Magnetic mounting system for fast graphic and panel swaps. No visible screws, repeatable assembly, ideal for rotating exhibition builds.
detailsSystem name: Magnetic Fixing System
Magnetic holder load capacity: up to 5 kg (max. 5 kg / 200 mm)
Magnetic holder MF 15.90: L 59 × W 17 × H 133 mm
Magnetic mounting profile MF 100.90 / MF 105.90: L 870 × W 30 × H 200 mm (with 2 × Z 308, for W 442/E)
Steel plate MF 80.37: L 300 × W 16 × H 200 mm (for 16 mm profile)
Shelf MF 125 (glass .51 / wood .30): L 250 × W 125 × H 8 mm (for MF 306 S)
Shelf MF 150 (glass .51 / wood .30): L 300 × W 150 × H 8 mm (for MF 306 S)
Cantilever bracket MF 226 S.41: overhang 200 mm; L 210 × W 40 × H 85 mm (for MF 12 / MF 15)
Bracket MF 306 S.41: flat; L 110 × W 92 × H 83 mm (for MF 12 / MF 15)
Tool set MF 1.90: L 119 × W 40 × H 83 mm (for MF 4 / MF 12 / MF 15)
Fabric tensioning: profile M 1307, panels with silicone edge grip
Frame / materials: aluminium frame and steel panels
Datasheet / label: AW 605 / MF 4
Need a quote or technical specifications for this category?
send inquiry